Close

  • APR Stage 1 'High Torque' MKVII Volkswagen Golf R tune dynos 378 horsepower & 414 lb-ft of torque

    These figures come from APR UK who has an all wheel drive Dynojet. They took a MKVII Volkswagen Golf R and added the 'High Torque' Stage I APR 2.0 EA888 ECU flash tune along with an APR carbon fiber intake system.


    The result? 378 horsepower and 414 lb-ft of torque:


    You will notice they have the Dynojet reading output as 'Max Clutch Power' rather than default settings. This is supposed to read closer to bhp but it is essentially just a correction factor.

    To put these results in perspective a stock MKVII Golf R puts down roughly ~258 awhp on a Dynojet. The 309 bhp baseline is reading about 16% higher.

    Regardless, we're talking almost 400 horsepower with just a tune and intake on pump gas from a Golf R.


    This article was originally published in forum thread: APR Stage 1 'High Torque' MKVII Volkswagen Golf R tune dynos 378 horsepower & 414 lb-ft of torque started by Sticky View original post